-- *****************************************************************************
-- Juniper-IPV6-PROFILE-MIB
--
-- Juniper Networks Enterprise MIB
-- IPv6 Profile MIB
--
-- Copyright (c) 2003 Juniper Networks, Inc. All Rights Reserved.
-- *****************************************************************************Juniper-IPV6-PROFILE-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Unsigned32FROM SNMPv2-SMI
DisplayStringFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
InetAddressIPv6FROM INET-ADDRESS-MIB
Ipv6AddressPrefixFROM IPV6-TC
juniMibs
FROM Juniper-MIBs
JuniEnable, JuniName, JuniSetMap
FROM Juniper-TC;juniIpv6ProfileMIB MODULE-IDENTITYLAST-UPDATED"200707191819Z"-- 24-Jul-07 02:19 PM EDTORGANIZATION"Juniper Networks"CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"DESCRIPTION"The IPv6 Profile MIB for the Juniper Networks enterprise."-- Revision HistoryREVISION"200707191819Z"-- 24-Jul-07 02:19 PM EDT - JUNOSe 8.2DESCRIPTION"Added ND support on dynamic interface."REVISION"200309291758Z"-- 29-Sep-03 01:58 PM EDT - JUNOSe 5.1DESCRIPTION"Initial version of this MIB module."::={ juniMibs 68}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed object groups
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniIpv6ProfileObjects OBJECTIDENTIFIER::={ juniIpv6ProfileMIB 1}juniIpv6Profile OBJECTIDENTIFIER::={ juniIpv6ProfileObjects 1}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects for IPv6 Profiles
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
--
-- This MIB defines configuration profile structure for IPv6 interfaces.
-- The creation/deletion of profiles and mapping of profile names to profile
-- indices is coordinated in the Juniper-PROFILE-MIB.
--
--
-- The IPv6 Profile Table
--juniIpv6ProfileTable OBJECT-TYPE
SYNTAXSEQUENCEOF JuniIpv6ProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The entries in this table describe profiles for configuring IP
interfaces.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB."::={ juniIpv6Profile 1}juniIpv6ProfileEntry OBJECT-TYPESYNTAX JuniIpv6ProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A profile describing configuration of an IPv6 interface."INDEX{ juniIpv6ProfileId }::={ juniIpv6ProfileTable 1}
JuniIpv6ProfileEntry ::=SEQUENCE{
juniIpv6ProfileId Unsigned32,
juniIpv6ProfileSetMap JuniSetMap,
juniIpv6ProfileRouterName JuniName,
juniIpv6ProfileIpv6Addr InetAddressIPv6,
juniIpv6ProfileIpv6MaskLen Integer32,
juniIpv6ProfileMtu Integer32,
juniIpv6ProfileSrcAddrValidEnable JuniEnable,
juniIpv6ProfileInheritNumString DisplayString,
juniIpv6ProfileNdEnabled JuniEnable,
juniIpv6ProfileNdManagedConfig JuniEnable,
juniIpv6ProfileNdOtherConfig JuniEnable,
juniIpv6ProfileNdSuppressRa JuniEnable,
juniIpv6ProfileNdRaInterval Integer32,
juniIpv6ProfileNdRaLifeTime Integer32,
juniIpv6ProfileNdReachableTime Integer32,
juniIpv6ProfileNdPrefix Ipv6AddressPrefix,
juniIpv6ProfileNdPrefixLength Integer32,
juniIpv6ProfileNdPrefixOnLinkFlag JuniEnable,
juniIpv6ProfileNdPrefixAutonomousFlag JuniEnable,
juniIpv6ProfileNdPrefixPreferredLifetime Integer32,
juniIpv6ProfileNdPrefixValidLifetime Integer32}juniIpv6ProfileId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."::={ juniIpv6ProfileEntry 1}
juniIpv6ProfileSetMap OBJECT-TYPESYNTAX JuniSetMap
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring
JuniSetMap."::={ juniIpv6ProfileEntry 2}juniIpv6ProfileRouterName OBJECT-TYPESYNTAX JuniName
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The virtual router to which an IPv6 interface configured by this
profile will be assigned, if other mechanisms do not otherwise specify a
virtual router assignment."DEFVAL{""}::={ juniIpv6ProfileEntry 3}juniIpv6ProfileIpv6Addr OBJECT-TYPESYNTAXInetAddressIPv6MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An IPv6 address to be used by an IPv6 interface configured by this
profile. This object will have a value of 0::0 for an unnumbered
interface."DEFVAL{ '00000000000000000000000000000000'H }::={ juniIpv6ProfileEntry 4}juniIpv6ProfileIpv6MaskLen OBJECT-TYPESYNTAXInteger32(0..128)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An IPv6 address mask length to be used by an IPv6 interface configured
by this profile. This object will have a value of 0 for an unnumbered
interface."DEFVAL{0}::={ juniIpv6ProfileEntry 5}juniIpv6ProfileMtu OBJECT-TYPESYNTAXInteger32(0|1280..10240)MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"The configured MTU size for this IPv6 network interface. If set to
zero, the default MTU size, as determined by the underlying network
media, is used."DEFVAL{0}::={ juniIpv6ProfileEntry 6}juniIpv6ProfileSrcAddrValidEnable OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable/disable whether source addresses in received IPv6 packets are
validated. Validation is performed by looking up the source IPv6
address in the routing database and determining whether the packet
arrived on the expected interface; if not, the packet is discarded."DEFVAL{ disable }::={ juniIpv6ProfileEntry 7}juniIpv6ProfileInheritNumString OBJECT-TYPESYNTAXDisplayString(SIZE(0..80))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The text identifier of the numbered interface, associated with the
specified virtual router, whose IPv6 address is used as the source
address when transmitting IPv6 packets on unnumbered remote access user
links. Types/formats/examples for this string include:
Loopback
loopback <id>
'loopback 0'
ATM Virtual Circuit
atm <slot>/<port>.<distinguisher>
'atm 3/1.100'
Ethernet
{ fastEthernet | gigabitEthernet } <slot>/<port>
'fastEthernet 3/0'
'gigabitEthernet 3/0'
Ethernet VLAN
{ fastEthernet | gigabitEthernet } <slot>/<port>:<vlanID>
'fastEthernet 3/0:1000'
'gigabitEthernet 3/0:1000'
Channelized Serial
serial <slot>/<port>:<channelSpecifier>[/<channelSpecifier>]*
'serial 3/0:4' (T1/E1)
'serial 3/0:2/4' (T3/E3)
'serial 3/0:2/1/1/4' (OC3/OC12 - channelized DS3)
'serial 3/0:2/1/1/1/4' (OC3/OC12 - virtual tributaries)
Other formats may be supported over time.
An empty string indicates the referenced interface is unspecified, e.g.,
when this IPv6 interface is numbered."DEFVAL{""}::={ juniIpv6ProfileEntry 8}juniIpv6ProfileNdEnabled OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable/disable ND for this IPv6 network interface."DEFVAL{ disable }::={ juniIpv6ProfileEntry 9}juniIpv6ProfileNdManagedConfig OBJECT-TYPE
SYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable/disable ND managed config for this IPv6 network interface."DEFVAL{ disable }::={ juniIpv6ProfileEntry 10}juniIpv6ProfileNdOtherConfig OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable/disable ND other config for this IPv6 network interface."DEFVAL{ disable }::={ juniIpv6ProfileEntry 11}juniIpv6ProfileNdSuppressRa OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Enable/disable ND suppress RA for this IPv6 network interface."DEFVAL{ disable }::={ juniIpv6ProfileEntry 12}juniIpv6ProfileNdRaInterval OBJECT-TYPESYNTAXInteger32(3..1800)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The configured interval between IPv6 RA transmissions on the interface."DEFVAL{200}::={ juniIpv6ProfileEntry 13}juniIpv6ProfileNdRaLifeTime OBJECT-TYPESYNTAXInteger32(0..1800)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The configured RA lifetime for this IPv6 network interface."DEFVAL{1800}::={ juniIpv6ProfileEntry 14}juniIpv6ProfileNdReachableTime OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The configured RA reachable time for this IPv6 network interface."DEFVAL{0}::={ juniIpv6ProfileEntry 15}juniIpv6ProfileNdPrefix OBJECT-TYPESYNTAXIpv6AddressPrefix
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The prefix associated with the this interface."::={ juniIpv6ProfileEntry 16}juniIpv6ProfileNdPrefixLength OBJECT-TYPESYNTAXInteger32(1..128)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The length of the prefix (in bits)."::={ juniIpv6ProfileEntry 17}juniIpv6ProfileNdPrefixOnLinkFlag OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise."DEFVAL{ enable }::={ juniIpv6ProfileEntry 18}juniIpv6ProfileNdPrefixAutonomousFlag OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-write
STATUScurrentDESCRIPTION"Autonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface address).
If false(2), it is not used to autoconfigure
a local interface address."DEFVAL{ enable }::={ juniIpv6ProfileEntry 19}juniIpv6ProfileNdPrefixPreferredLifetime OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"It is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.
The address generated from a deprecated prefix
should no longer be used as a source address in
new communications, but packets received on such
an interface are processed as expected."DEFVAL{604800}::={ juniIpv6ProfileEntry 20}juniIpv6ProfileNdPrefixValidLifetime OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-write
STATUScurrentDESCRIPTION"It is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.
The address generated from an invalidated prefix
should not appear as the destination or source
address of a packet."DEFVAL{2592000}::={ juniIpv6ProfileEntry 21}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB. Placeholders follow.
-- juniIpv6ProfileTrapControl OBJECT IDENTIFIER ::= { juniIpv6ProfileMIB 2 }
-- juniIpv6ProfileTraps OBJECT IDENTIFIER ::= { juniIpv6ProfileMIB 3 }
-- juniIpv6ProfileTrapPrefix OBJECT IDENTIFIER ::= { juniIpv6ProfileTraps 0 }-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniIpv6ProfileMIBConformance
OBJECTIDENTIFIER::={ juniIpv6ProfileMIB 4}juniIpv6ProfileMIBCompliances
OBJECTIDENTIFIER::={ juniIpv6ProfileMIBConformance 1}juniIpv6ProfileMIBGroups
OBJECTIDENTIFIER::={ juniIpv6ProfileMIBConformance 2}
--
-- compliance statements
--juniIpv6ProfileCompliance MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete Compliance statement for systems supporting IPv6 configuration
profiles. This statement became obsolete when added ND support."MODULE-- this moduleMANDATORY-GROUPS{
juniIpv6ProfileGroup }::={ juniIpv6ProfileMIBCompliances 1}-- JUNOSe 5.1juniIpv6ProfileCompliance1 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"Compliance statement for systems supporting IPv6 configuration
profiles, incorporating support of ND on dynamical interface."MODULE-- this moduleMANDATORY-GROUPS{
juniIpv6ProfileGroup1 }::={ juniIpv6ProfileMIBCompliances 2}-- JUNOSe 8.2--
-- units of conformance
--juniIpv6ProfileGroup OBJECT-GROUPOBJECTS{
juniIpv6ProfileSetMap,
juniIpv6ProfileRouterName,
juniIpv6ProfileIpv6Addr,
juniIpv6ProfileIpv6MaskLen,
juniIpv6ProfileMtu,
juniIpv6ProfileSrcAddrValidEnable,
juniIpv6ProfileInheritNumString }STATUSobsoleteDESCRIPTION"An obsolete collection of objects providing management of IPv6 Profile
functionality in a Juniper product. This statement became obsolete
when added ND support."::={ juniIpv6ProfileMIBGroups 1}-- JUNOSe 5.1juniIpv6ProfileGroup1 OBJECT-GROUPOBJECTS{
juniIpv6ProfileSetMap,
juniIpv6ProfileRouterName,
juniIpv6ProfileIpv6Addr,
juniIpv6ProfileIpv6MaskLen,
juniIpv6ProfileMtu,
juniIpv6ProfileSrcAddrValidEnable,
juniIpv6ProfileInheritNumString,
juniIpv6ProfileNdEnabled,
juniIpv6ProfileNdManagedConfig,
juniIpv6ProfileNdOtherConfig,
juniIpv6ProfileNdSuppressRa,
juniIpv6ProfileNdRaInterval,
juniIpv6ProfileNdRaLifeTime,
juniIpv6ProfileNdReachableTime,
juniIpv6ProfileNdPrefix,
juniIpv6ProfileNdPrefixLength,
juniIpv6ProfileNdPrefixOnLinkFlag,
juniIpv6ProfileNdPrefixAutonomousFlag,
juniIpv6ProfileNdPrefixPreferredLifetime,
juniIpv6ProfileNdPrefixValidLifetime }STATUScurrentDESCRIPTION"The basic collection of objects providing management of IPv6 Profile
functionality in a Juniper product."::={ juniIpv6ProfileMIBGroups 2}-- JUNOSe 8.2END